Products

  • Steel Cement Panel

    Steel Cement Panel

    Key performance characteristics: -Panel size 600x600x35m or 610x610x35mm or 500x500x27mm -A welded structural steel assembly -Top finish High pressure laminate, conductive PVC, vinyl, plywood tile, composite wood panel, porcelain tile, terrazzo and etc. -Formulated cementitious fill -Powder coated epoxy finish -Stability:remain stable and not alter the performance characteristics when exposed thermal and humidity change. -All componets shall be protected against corrosion with the manufactu...

  • 68% Steel Grate Panel

    68% Steel Grate Panel

    (1)60cm or 24” square to fit for various of access floor panels. (2)Q195 steel material, 22kg weight per panel and epoxy coating finish. (3)68% opening rate. (4)Air flow chart available. By CISCA testing method, rating at 2500lb concentrate load and 2000lb 10 passes rolling load.

  • Aluminum Panel A55-FS1500

    Aluminum Panel A55-FS1500

    Key performance characteristics: -Panel type A55, size 600x600x55m, panel weight: 12kgs/pc -Top finish High pressure laminate, conductive PVC, vinyl, plywood tile, composite wood panel, porcelain tile, terrazzo and etc. -Die-cast aluminum panel -Powder coated finish Applications: Create prefect data center or general office environment by UPIN’s raised access floor system. Widely used in clean rooms, data center,airport, bank, laboratories, hospitals, factories and etc. Panel type conc.loa...

  • pedestal

    pedestal

    UPIN’s understructures have either electro zinc or hot dipped galvanization treatment. A wide variety of design options including low-profile, standard, heavy duty, extra heavy duty anti-seismic understructures are available in our factory. FACTORY UPIN Product Code Flat head pedestal Description The pedestal are assembled with cold steel flat head fillet welded with stud and base plate fillet welded with tube. Head gasket   NA Head   Head plate 76mmx76mmx3mm, cold steel type,...

  • stringer

    stringer

    UPIN’s understructures have either electro zinc or hot dipped galvanization treatment. A wide variety of design options including low-profile, standard, heavy duty, extra heavy duty anti-seismic understructures are available in our factory. FACTORY UPIN Product Code Stringer Description C channel cold galvanized stringer 21mmx30mmx575mm and 1.0mmT.  Product Code Screw Description Round head 11mm dia.. The threaded part 6mm dia.x43mmL, steel screw by electro zinc coating. ...

Recommend Products

Single-Post Pneumatic Lifting Desk Zt565

Single-Post Pneumatic Lifting Desk Zt565

Material: The table top is made of Density Fiberboard, with high quality steel stand. Feature: 1. Height adjustable:785-1095mm; 2. Surface is smooth, exquisite 3. Moisture-proof, resistance to deformation 4. Anti-scratch, easy to clean 5. with castors, moving easily. Description: Density: ≥680kg/m3 Dimension: L770*W380*H785-1095mm colour: as picture Step 1: Fix the screw(base frame) in the direction of the arrow shown in the figure Step 2: Fix the screw(table top) in the dire...

42% Perf Panel

42% Perf Panel

• Cold steel structure • Non-combustible material • 42% open area • Available with coatings • Top surface adjustable damper available • Removable with portable lifting device • Load performance-see table below • Airflow data-see chart below • Fitting for various of access floor panels • 600mm or 24 inches square • Panel weight: 11kg/pc bare • Panel height: 38mm • The stringer width requirement: 21mm wide for both 60cm and 24 inches system What kinds of payment methods do you accep...

55% Alu Grate Panel

55% Alu Grate Panel

• Die cast aluminum structure • Non-combustible material • 56% open area • Available with coatings • Top surface adjustable damper available • Removable with portable lifting device • Load performance-see table below • Airflow data-see chart below • Fitting for various of access floor panels • 600mm or 24 inches square • Panel weight: 11kg/pc bare • Panel height: 41mm • The stringer width requirement: 21mm wide for both 60cm and 24 inches system ∆Ps Static pressure box(Pa) ...

68% Aluminum Grate Panel

68% Aluminum Grate Panel

Static Pressure Air Volumn Air Velocity 2.5 1311 8.5 5 1820 11.3 7.5 2232 13.9 10 2594 16.3 12.5 2896 18.6 15 3110 20 17.5 3387 22.3 20 3665 24 22.5 3893 24.6 25 4017 26.3 Do you have a minimum order quantity? Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website What is...

600x600mm Air Grille Spec.

600x600mm Air Grille Spec.

• Fitting for steel panels, woodcore or calcium sulphate panels. • 600mmx600mm or 24”x24”. • Panel weight: 10kg/pc • Panel height: 50mm with damper • The stringer width requirement: apply the same stringer as what for panels. • aluminum extruded structure • 68% open area • Available with coatings • Bottom adjustable damper available • Removable with portable lifting device system Static loads Rolling loads Impact loads Panel Understructure Concentrated loads ...

cable grommet

cable grommet

Upin’s round/square cable grommets fits into access floor panels to provide a safe, neat and effective outlet for electrical power leads, telecom cables, data cables and vacuum hoses. The grommet is designed for heavy duty use as it is manufactured from a very durable ABS plastic. The grommet incorporated a smart and simple design, The plastic body extends through the panel to protect the cables.

round brush grommet 75mm dia

round brush grommet 75mm dia

Product Name: Round Grommet Application: Designed to seal openings in new and existing raised floor cutouts to block bypass airflow and maximize cooling system efficiency. Color: • UPIN’s round grommet is molded from durable polypropylene with black color size: Dimensions and Tile Cutting Requirements Size (W x D x H) Overall size diameter x height 82 x 20 mm Product height above the raised floor 4 mm Maximum cutout size sealed 76 mm Usable cable area 5671 sq. mm  Sealing Effect...

Square brush grommet 140x140mm

Square brush grommet 140x140mm

The cable grommet can be fitted in all types of floor and is quick to install and easy to use. Made of high strength plastics supplied in black and size to be 140x140mm. The grommet is designed for heavy duty use as it is manufactured from a very durable ABS plastic. The grommet incorporated a smart and simple design, The plastic body extends through the panel to protect the cables.